Excellent Configuration

The upgraded multi-functions make the good performance on all kinds of floors. 

2D Map Navigation Bionic Algorithm

The robot vacuum cleaner will do map navigation automatically for the whole house then accurately position the whole house and make the partition cleaning scheme. The cleaning efficiency will be greatly improved because of the regular cleaning path.

WiFi App Control Control At Your Pleasure

The cleaning path is visible on the mobile app so you could know the cleaning at a glance timely. And adjust the cleaning modes at any time as you want. 

Visualization of Cleaning Process

Don’t need complicated steps but only finger’s clicks to give the instructions of the cleaning modes.

Intelligent Partition Cleaning Covering the Whole House

The robot vacuum will do a partition clenaing scheme and calculate the size of the room automatically. 

Make Up the Missing Part Thoroughly

As the robot memorizes where has been cleaned and where has not. It will make up the missing area and the edge of the wall then no any part is missing and the whole is cleaned thoroughly. 

Say goodbye to random cleaning modes Save Time and Energy

Advanced gyroscope navigation and mapping system building.

Easy to Switch the Dustbin and the Water Tank

No need to put the robot vacuum cleaner upside down but just insert the dustbin or the water tank into the bottom of the robot vacuum then the installation is in place. 

Intelligent Water Tank Effective Removal of Stains

Electric water tank enables the water to come out when working and stop to come out when not working. 

Strong Suction Wipe Out Every Tiny Dust Everywhere It Godes

Fan assembly with big suction and low noise, floating central brush and dynamic side brushes make cleaning easy and convenient. 

V-shaped Brush of Floating and Anti-twining Helps a Deep Clean

The floor joint and carpet edge is where dust hides and hard to clean. V-shaped floating roller brush collects the dust by clinging to the floor to do the fluctuate cleaning and at the same time to prevent second pollution. 

2500mAh Li-ion Battery

The 2500mAh Li-ion battery enables the robot to clean a large household. 

Installation of Water Tank

1. Add Water
2. Install Mop
3. Install the water tank assembly
4. Start Mopping the floor
Note: Do not use the floor mopping function on carpets. 
After mopping the floor, please empty the water tank in time and remove the mop. 

Maintenance of Dust Box

1. Press the dust box button to take out the dust box; 
2. Open the dust box side cover; 
3. Dumping the rubbish.
4. Open the HEPA Filter cover;

Maintenance of Dustbin Box

5. Open the HEPA filter cover and take out the HEPA filter and the primary filter. It is not recommended to wash the HEPA filter by water. Tap gently to remove the dust; 
6. Rinse the primary filter; 
7. The dust box should be scrubbed with mop; 

Dry the dust box

8. Dry the dust box and filter assembly and keep it dry to ensure its service life; 
9. Replace the primary filter and the HEPA filter into the dust box; 
Note: 1. Before installing the filters, please ensure that the HEPA filter and the primary filter are in dry state. 
10. Do not expose the HEPA filter and primary filter to the sun. 
11. Close the dust box cover and install the dust box into the host. 
Note: Do not allow water to seep into the fan port when cleaning.

Maintenance of Water Tank and Mop

1.Take out the water tank assembly;
2. Remove the mop;
3. Empty the Water Tank;
4. Washing mop;
5. Airing;
6. Dry or naturally dry the water tank.

How to clean the rubbish in the dustbin of the water tank

1. Put the water tank horizontally with the dustbin port upside.
2. Clean up the rubbish in the dustbin of the water tank with running water.
3. Dry up the conductive shrapnel

Maintenance of roller brush and side brush

1. Open the roller brush cover assembly;
2. Take out the roller brush shaft;
3. Use the cleaning brush to cut off the hair tangled on the roller brush;
4. Clean the side brush. 

Maintenance of charging pole pieces, ground sensors, drive wheels and universal wheel

1.Clean the charging pole pieces with cloth. 
2.Clean the ground sensors with cloth. 
3.Clean the drive wheels and the universal wheel with cloth. 
Note: If you do not use the product for a long time, please fully charge it before storing. Turn off the host and keep charging power to it every 3 months to prevent the battery from over discharge. If the battery is over discharged or is not used for a long time, the product may not be able to be charged. Please contact our company for after-sales maintenance. Do not disassemble it by yourself.